Available for 18 – 60T
Lifts, aligns and drives without a crane.
Starting from
$81,675
Or with AB 0% Finance from $403/week (ex. GST)
A top-down vibrating pile driver for 18–60 tonne excavators. Tilt and rotation lift, align and drive each pile from the machine, so a crane is not needed to present them one at a time.
14 photos
04
10
The difference
EveryAussieBucketstop-downvibratingpiledriverispurpose-builtforthemachineyourunandprecision-engineeredaroundthecostthatdominatesapilingjob:thesecondmachine.Availablefor18–60Tmachinesacrossfourbuilds,with360-degreerotationand90-degreetilt.
WhatdistinguishesourTop-DownVibratingPileDriverisitsheavy-dutyvibratingcylinders,high-qualityelectricalharnessandfulltiltingandrotationcapabilityacrossI-beams,pipes,sheetpilesandplates.Comparedtoacrane-fedrig,eachpileislifted,alignedanddrivenfromtheexcavator,andextractionrunsonthesametoolwithoutachange.
AllTop-DownVibratingPileDriversareaccompaniedwithourstandard5-yearwarranty.
Built for the most demanding piling conditions, this top-down vibrating pile driver features heavy-duty vibrating cylinders, a precision electrical harness, and full tilting and rotation capability for driving and pulling I-beams, pipes, sheet piles, and plates.
Features
Boasting a 90-degree tilting function, easily pick up sheet piles horizontally and simplifying manual interference in the pile-driving process. Meanwhile the 360-degree rotating functionality allows for optimal positioning. Combined, these features allow for greater efficiency and safety regardless of site angle or position.
Capable of both driving and pulling out piles, designed for handling I-beams, pipes, sheet piles and plates. Can handle I-beams with widths as little as 250mm, with the ability for down to 200mm available by request. For pipes, a diameter of 280mm with smaller sizes available by request. This provides maximum flexibility with handling various sized piles and enhancing operational efficiency.
Generates high-frequency vibrations which help drive piles into the ground effectively. Its robust construction means it can withstand the extreme forces generated when driving piles improving reliability and efficiency over long periods of time.
This component interconnects the electrical systems of the machine, such as its sensors, motors and controllers. Meticulously designed and assembled to ensure reliable and efficient transmission of electrical signals. This allows for maximum machine uptime and reliability, improving safety and increasing reliability. It allows for quick fault detection and simple maintenance, when required.
Four build sizes covering 18 tonne to 60 tonne machines. Frequency, centrifugal force, setting pressure, rotation and tilt degree are listed for each build.
| Excavator size(T) | Frequency(BPM) | Centrifugal force(kN) | Setting pressure(bar) | Rotation(°) | Tilt degree(°) | Flow rate(L/min) | Max clamp opening(mm) | Weight(kg) |
|---|---|---|---|---|---|---|---|---|
| 18 – 26 | 3,600 – 3,800 | 400 | 250 | 360 | 90 | 160 – 210 | 57 | 1,850 |
| 27 – 36 | 3,000 – 3,400 | 580 | 250 | 360 | 90 | 210 – 240 | 57 | 2,190 |
| 37 – 46 | 2,800 – 3,200 | 690 | 280 | 360 | 90 | 240 – 270 | 57 | 2,385 |
| 47 – 55 | 2,600 – 2,800 | 800 | 280 | 360 | 90 | 280 – 300 | 53 | 3,000 |
Nothing here is an off-the-shelf pattern that you have to make work. Every unit is manufactured to your machine's tonnage, hitch and pin centres, so it bolts up to Caterpillar, Komatsu, Hitachi, Kobelco, Volvo, CASE, Kubota, Yanmar and Takeuchi alike. Send us the make, model and pin sizes and we match the bracket before it ships - if your machine isn't on this list, it still fits.
After receiving our first order which had a rock breaker and some mud sieve buckets we knew we'd come back for more, just placed the 3rd order, great service and advice from the sales team, the quality and finish of the attachments are better than I can get locally and a better price.
Good service answered any questions i had about matching the new rockbreaker to my machinery. And does the job intend for. Prompt delivery and hassle free. Definitely recommend Aussie Buckets.
We bought a mechanical grab for 20T excavator. Good communication during the whole process via email or phone. Good quality product which we haven't had a problem with at all. They also offered to help install when we picked up but was not required. All departments from order to pickup were very helpful.
Great rock bucket. Very effective for separating large rocks out of fill material. The ripper tooth is solid and well fabricated. I am very satisfied with my purchase after several weeks of use.
Recently bought a ripper and a rake for a 8ton digger, both great quality attachments. The guys at Aussie buckets are very easy to deal with, straight forward for ordering and purchasing. The rake is great for any job in grass or vegetation, even when mixed with rocks or rubbish.
Purchased a new Auger and drive with Aussie Buckets. The whole process including checking my dimensions I provided were correct was very easy, even for a backyard excavator operator. Now making tree planting and farm fencing a breeze.
Purchased a grab bucket through Aussie Buckets. Andrew and the team were super helpful and very thorough with all the measurements, information and communication. Bucket arrived today and have easily attached and straight into work. Super happy and will purchase more attachments with Aussie Buckets again.
Recently purchased a hydraulic grab for my mini excavator, great piece of equipment, great quality and pricing also customer service was fantastic. Easy partial assembly required, great bit of kit.
The hydraulic grab is better than any Christmas pressi. I use it on my farm dealing with trees and firewood. Also pipe laying. Try lifting 450 dia 12m long HDPE pipe and the grab fits perfect. OK the little Kubota knows it got a big fish on the hook but I can do what I can't do otherwise. Great choice - by me, great product thanks to you.
Great product, great service, Nick made the process very easy. The rotating grab has been an awesome addition for our scrap metal yard. Cheers from YP Recycling
Have bought a tilt hitch and now an auger drive package through the team, can't fault them at all, from Hayden in sales to the whole team. Will definitely be purchasing my equipment through Aussie buckets in the future
Great company to deal with. Excellent quality hydraulic grab attachment. The company was so nice to deal with I placed another order for a different attachment. Also kept me updated on my order from start to finish. Received my new auger and it is an amazing piece of kit coupled with a 350mm auger and I got the 1m extension also. Had a bit of time to test everything out and the grab is great for moving posts rocks and anything else to save my back. The auger has plenty of torque and because I'm in a bit of rocky ground I got the combination auger and it's busting through it quite well. Still very happy with my order and Aussie Buckets support and after sale check in just to see how everything is going.
Great team at Aussie Buckets. Very helpful and thorough in getting the correct dimensions. Regular updates on manufacture progress. And the 5 Finger Grab fitted perfectly and wow how powerful and useful. Tripled the use of my little 1.6 Takeuchi.
Huge thanks to Hayden and the whole team at Aussie Buckets!! Great price and really fantastic service. I purchased a hydraulic grab for my 305CR, great communication from the team throughout the order and delivery process and the attachment went straight onto the machine effortlessly and is very well built! I have already ordered a ripper and will be saving up for a stick rake next!!
We bought a hydraulic grab for our 5t excavator from Aussie Buckets and couldn't be happier. The square edged jaws help with gripping material while filtering out the dirt. So far, our customers have loved using it
I recently took delivery of the 1200mm wide heavy duty stick rake from Aussie Buckets. I was very impressed with the price I received and the staff kept me up to date during the procurement process. I love the design and the quality. I would very much recommend this product and I will look to source some more attachments through them in the future!
We purchased the hydraulic grab for our Kubota 1.7T for the purpose of moving rocks and logs which it does with ease. Exceptional design and construction I would highly recommend Aussie Buckets.
Needed a new rock hammer. Aussie Buckets delivered a quality product that is exactly what I required. Definitely would recommend
